Project Description
Amplitude Research Kit (ARK) – JD7555
The JD7555 is the Spatial Light Modulation Research Kit using JDC’s microdisplay panels for Amplitude/Monochrome applications.
Figure 1. ARK2K hardware views
Main Features
• Spatial Light Modulation for amplitude applications
• 8-bit monochrome with HDMI 1.4a standard addressing interface input
• Linear optical power modulations with 256 gray level scales
• SLM driver and panel in a single compact package
• Rich selections of panels and preconfigured for various application requirements
• Two mounting points aligned to optical center
• Plug and Display
Applications
• 3D AOI
• 3D Metrology
• 3D Scan
• Microscopy
• Maskless Lithography
• 3D Printing
• Structured Illumination Microscopy (SIM)
| Specifications | |
|---|---|
| Embedded Reflective LCoS Microdisplay Panel | JD4552VV13 |
| Resolution | 1920 x 1080 |
| Active Area Diagonal | 0.55” |
| Active Area | 12.29 mm × 6.91 mm |
| Pixel Pitch | 6.40 μm |
| Fill Factor (Aperture Ratio) | 93% |
| Wavelength | 430 ~ 750 nm |
| Contrast Ratio (CR) @UHP Green (F/2.8 with QWP) | 900:1 |
| Numbers of Input Level | 256 (8-bit) |
| Input frame rate | 60 Hz |
| Response Time (typical operating temperature) | < 12 ms |
| Input Signal I/F | HDMI 1.4a |
| Output frame rate | 120 Hz, reconfigurable |
| Power Supply | AC INPUT: 100-240 V, 50-60 Hz DC OUT: +12V/2A |
| Case Dimension | 95 mm × 65 mm × 20 mm |
| Mounting Points | M6 or 1/4”-20 |
Table : Specifications
Outline Dimensions
Figure 2. ARK2K module views
Vsync Output
Square wave pulses: VL=0.0 V and VH=3.6 V, pulse width = 0.2 ms; Rising edge triggers the start of frame at 60 Hz.